Panther LSA Wing Option

$0.00

The Panther?wing kit includes the?parts and components listed below.? Ribs are pre-drilled for spars and pre-formed.? Channels are pre-drilled and bent, and skins pre-drilled and bent.

*Note?- Hardware is not included in this kit.? Hardware list for the Panther wing kit can be found here.

Shipping not included?- shipping and handling fees will be calculated at time of shipping.

The Panther Wing Kit consists of three sub-kits:? The spar kit (P/N 4000 range), the fuel tank kit (3000 range)?and the wing rib, skin and controls kit (2000 range).

Description

See Panther Wing Load test HERE
Panther?Wing Kit Includes
?Part Description Part Number qty
Ribs
P-W-main rib-PA.025-R1-5-q5 2001 5
P-W-main rib-PA.025-R6-10,L8-10-q8 2002 8
P-W-main rib-PA.025-RL11-q2 2003 2
P-W-main rib-PA.025-RL12 -q2 2004 2
P-W-main rib-PA.025-RL13-q2 2005 2
P-W-main rib-PA.025-RL14-q2 2006 2
P-W-main rib-PA.025-L1-4-q4 2007 4
P-W-main rib-PA.025-L5-q1 2008 1
P-W-main rib-PA.025-L6-q1 2009 1
P-W-nose rib-PA.025-RL1-q2 2010 2
P-W-nose rib-PA.025-RL2-q2 2011 2
P-W-nose rib-PA.025-RL3-q2 2012 2
P-W-nose rib-PA.025-RL4-q8 2013 8
P-W-closer rib-PA.020-RL-q2 2014 2
P-W-rib attach angles-A.063×3/4×3/4-RL9-q18 2015 18
Skins
P-W-cover plate-A.025-q2 2016 2
P-W-Cover Ring-A.032-q2 2017 2
P-W-forward skin-A.020-RL-q2 2018 2
P-W-inboard lower skin- A.025-RL-q2 2019 2
P-W-inboard upper skin – A.025-RL-q2 2020 2
P-W-outboard upper skin-A.020-RL-q2 2021 2
P-W-outboard lower skin-A.020-RL-q2 2022 2
P-W-wing walk-A.032-L-q1 2023 1
Ailerons
P-W-A-skin-A.020-RL-q2 2024 2
P-W-A-rib-PA.020-RL1-5-q10 2025 10
P-W-A-control arm-PA.063-RL-q4 2026 4
P-W-A-bell crank-RL-q2 2027 2
P-W-A-bellcrank mount top-A.125×2.5×2.5-R-q2 2028 2
P-W-A-bellcrank mount top-A.125×2.5×2.5-L-q2 2029 2
P-W-A-bellcrank mount bottom-A.125×2.5×2.5-R-q2 2030 2
P-W-A-bellcrank mount bottom-A.125×2.5×2.5-L-q2 2031 2
P-W-A-mount angle-A.063×3/4×3/4-RL-q8 2032 8
P-W-A-joiner mount upper-A.125×2.5×2.5-q1 2033 1
P-W-A-joiner mount lower-A.125×2.5×2.5-q1 2034 1
P-W-A-joiner mount right-A.125×2.5×2.5-q1 2035 1
P-W-A-joiner mount left-A.125×2.5×2.5-q1 2036 1
P-W-A-counter weight-q2 2037 2
P-W-A-counter arm-q2 2038 2
P-W-A-push rod ends-WS-q4 2039 4
P-W-A-tubes-A 1 1/8″ tube-q2 2040 2
Flaps
P-W-F-skin-A.020-RL-q2 2041 2
P-W-F-rib-PA.020-RL1-6-q12 2042 12
P-W-F-drive angle-A.125×2.5×2.5-RL-q2 2043 2
Wing Slider?
P-W-slider blocks-Nylon 1/4″-RL-q4 2044 4
P-W-slider tube-A 2″-RL-q2 2045 2
Wing Tips
P-W-fiberglass tip-R-q1 2046 1
P-W-fiberglass tip-L-q1 2047 1
Fuel Tanks Kit
P-W-FT-Tank Back-FAC.032-q2 3001 2
P-W-FT-inner support – A.063- qty2 3002 2
P-W-FT-Pick Doubler – A.063-q2 3003 2
P-W-FT-Skin-A.025-RL-q2 3004 2
P-W-FT-rib-BA.025-RL1-6-q12 3005 12
Wing Spar Kit
0.25
P-W-WS-pin block-A.250-RL1-2-q8 4001 8
P-W-WS-stiffener-A.250-RL1-q2 4002 2
P-W-WS-stiffener-A.250-RL2-q2 4003 2
P-W-WS-stiffener-A.250-RL3-q2 4004 2
0.63
P-W-WS-web-A.063-RL1-q2 4005 2
0.032
P-W-WS-web-A.032-RL2-q2 4006 2
Angle 1.5×1.5x.125
P-W-WS-cap-AEA1.5×1.5x.125-LUF-q1 4007 1
P-W-WS-cap-AEA1.5×1.5x.125-LLF-q1 4008 1
P-W-WS-cap-AEA1.5×1.5x.125-RUF-q1 4009 1
P-W-WS-cap-AEA1.5×1.5x.125-RLF-q1 4010 1
P-W-WS-cap-AEA1.5×1.5x.125-LUA-q1 4011 1
P-W-WS-cap-AEA1.5×1.5x.125-LLA-q1 4012 1
P-W-WS-cap-AEA1.5×1.5x.125-RUA-q1 4013 1
P-W-WS-cap-AEA1.5×1.5x.125-RLA-q1 4014 1
P-W-RS-Rear Spar Channel – FAC.032-q2 4015 2
P-W-RS-Attach Fitting – A.1875-RL1-q2 4016 2

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.