Page 1 of 1

Re: Cordless Rivet Puller

Posted: Wed Oct 12, 2022 9:38 pm
by doriza01
I’m about 90% done with my tail using the M12. Works perfectly and quite enough to work just below my daughter’s nursery.

Re: Cordless Rivet Puller

Posted: Tue Sep 13, 2022 7:28 am
by 75kr@att.net
I use the M-12 rivet puller in a high school build. Nice and quiet but painfully slow.

Re: Cordless Rivet Puller

Posted: Wed Sep 07, 2022 12:35 pm
by renaissanceman
I've pulled a few thousand rivets with the M12. It was pricey, but I'm so glad I got it. Haven't used the pneumatic puller since. It is a tad slower, so if you were doing a ton of rivets at once I might consider the pneumatic. But the reality is that it's just so convenient. No loud compressor, no air hoses. I've still never had to recharge the battery yet.

Awesome tool, highly recommend.

Re: Cordless Rivet Puller

Posted: Fri Jul 15, 2022 11:17 am
by Telly
I have the M12, but haven't pulled any rivets with it yet. I will post once I start, which will be soon hopefully.

Re: Cordless Rivet Puller

Posted: Thu Apr 23, 2020 7:18 am
by aerobat
MikeS. wrote:I’m curious about the M-12 too, but it would have to pull all of the various rivets used in the Panther with no issues before I would consider spending $300 for the kit with batteries and charger. If no one here has tried the M-12 you could see if a RV-12 builder has tried it.

Will check out RV-12, Sonex, and Zenith forums.

Thanks,

Re: Cordless Rivet Puller

Posted: Wed Apr 22, 2020 11:39 pm
by MikeS.
I’m curious about the M-12 too, but it would have to pull all of the various rivets used in the Panther with no issues before I would consider spending $300 for the kit with batteries and charger. If no one here has tried the M-12 you could see if a RV-12 builder has tried it.

Cordless Rivet Puller

Posted: Wed Apr 22, 2020 2:34 pm
by aerobat
Looking at tools to buy for the Panther project. Driven plenty of wing spar solid rivets in the past, but not much experience installing pull rivets.

Has anyone here used the Milwaukee cordless M-12 Rivet puller?

https://www.milwaukeetool.com/Products/ ... ls/2550-20

Thanks,