Page 1 of 1
Re: Tail tip attach layout?
Posted: Tue May 01, 2018 6:23 pm
by PlaneDan
I wish that I had painted my gear as you did, before installation. Nice job.
Re: Tail tip attach layout?
Posted: Mon Apr 30, 2018 8:28 pm
by ykachuro
There is guidance on the HS and VS tip installation in the BM (final assembly section). It is consisten with what Dan is suggesting.
Re: Tail tip attach layout?
Posted: Mon Apr 30, 2018 5:29 pm
by PlaneDan
The holes are not shown in this pic, but I put them adjacent to the holes for the rib rivets. Mine are attached with anchor nuts and screws, but I would have laid it out the same if I were riveting them on. I did the same for all tips.
Scroll to the bottom for these photos.
http://pantherbuilder.org/PantherWeb/Ta ... index.html
Tail tip attach layout?
Posted: Mon Apr 30, 2018 2:16 pm
by Brad
I can’t seem to find the hole layout for the tail fiberglass tips in the manual or plans?