Page 1 of 1
Re: Dimensions
Posted: Fri Jan 26, 2018 5:54 pm
by ynkster
The Panther is about 19 feet over all. I would tell you that it should be at least that long and8 feet wide. these are absolute minimums. You have to have enough room to walk around the airframe, and to work on it. I have a 28 x 40 garage., and I wish it was larger!
Panther #46
Bill Mosher
ynkster@aol.com
Re: Dimensions
Posted: Thu Jan 25, 2018 6:11 pm
by F16dcc431
I need the length of the airframe when the the aft fuselage and fwd fuselage are joined to include rudder and elevator. I am verifying space need in my shop for the next step of the process.
Re: Dimensions
Posted: Thu Jan 25, 2018 6:03 pm
by JimParker256
Not meaning to be a PITA or anything, but "Firewall -AFT" is a pretty general specification. I think you need to be more specific, like "Top of firewall to back edge of rudder hinge" or something like that. Otherwise, you may get a dimension that isn't what you need
Dimensions
Posted: Thu Jan 25, 2018 1:48 pm
by F16dcc431
Can some one take a measurement from the Firewall -AFT. I am preparing for the next section of my build.