Page 1 of 1

Re: Scratched Bubble

Posted: Fri Oct 13, 2017 7:03 pm
by ynkster
I have seen Paul Salters "Bubble", and it was the best looking that I have seen. The head light kits work. No matter how you do it, it will take time for great results!

Mounting A Tablet

Posted: Fri Oct 13, 2017 2:55 pm
by PlaneDan
I plan to use a 7" tablet for navigation backup. If anyone has photos of their installation of this item, please post.

Also, how do you make a new topic in this thread of "Finishing Touches".

Thanks,

Re: Scratched Bubble

Posted: Fri Oct 13, 2017 2:51 pm
by PlaneDan
Please let us know how it works out. Post photos if possible. I will do the same.

Re: Scratched Bubble

Posted: Mon Oct 09, 2017 3:00 am
by JeffereyC
PlaneDan wrote: Fri Sep 22, 2017 6:52 pm Embarrassed, yes I am. I greatly benefited from Quick Extender Pro and was not as careful as I should have been and now I need to get some scratches out. I found that Micro Mesh is supposed to be very good at this, but it will only work on Acrylic. So, I need to know if the bubble is or is not acrylic.

Thanks for your response.
Same problem here. I'm going to give Micro Mesh a try as well. Hopefully it's good.

Re: Scratched Bubble

Posted: Sat Sep 23, 2017 8:38 pm
by psalter
It is acrylic.

Another item I used on my canopy to remove scratches with great success is the 3M headlight restoration kit, $20 at auto part stores.

Only caution, everything I tried leaves some optical distortion, so only do as much as necessary to remove the scratch, especially if it is in your primary sight lines.

Scratched Bubble

Posted: Fri Sep 22, 2017 6:52 pm
by PlaneDan
Embarrassed, yes I am. I was not as careful as I should have been and now I need to get some scratches out. I found that Micro Mesh is supposed to be very good at this, but it will only work on Acrylic. So, I need to know if the bubble is or is not acrylic.

Thanks for your response.