Wing building
Forum rules
A forum for Panther aircraft builders and Enthusiasts. Two simple rules: Play nice and use a real name
A forum for Panther aircraft builders and Enthusiasts. Two simple rules: Play nice and use a real name
- mayo3808
- Posts: 39
- Joined: Fri Mar 13, 2015 7:30 am
- First Name: Brent
- Last Name: Mayo
- City or Town: Fernandina
- State or Province: FL
Re: Wing building
Yes, you should rivet the ribs to the main spar and rear spar before mounting in jig for alignment and skinning.
Brent Mayo
SN#053 Flying
Corvair 3.0
Fernandina, FL
SN#053 Flying
Corvair 3.0
Fernandina, FL
- at7000ft
- Posts: 175
- Joined: Sun Apr 13, 2014 4:59 pm
- First Name: RICK
- Last Name: HOLLAND
- City or Town: CASTLE ROCK
- State or Province: Colorado
- Location: Castle Rock, CO
Wing building
I understand that the main and rear spars need to be aligned and rigidly mounted (as described in the BM) prior to skin drilling/clecoing/riveting but can the ribs be riveted to the spars before rear spar alignment/mounting?
thanks
Rick H
thanks
Rick H
Rick Holland
N6819Z
N6819Z