Call Mike at Cleaveland tool and he will customize any tool kit for your needs. Tell him what you are building and the tools you have and he will get you what you need to get started all the way to everything you need to finish.
http://www.cleavelandtool.com
800-368-1822
Tools
Forum rules
A forum for Panther aircraft builders and Enthusiasts. Two simple rules: Play nice and use a real name
A forum for Panther aircraft builders and Enthusiasts. Two simple rules: Play nice and use a real name
-
- Posts: 11
- Joined: Mon May 27, 2013 4:24 pm
- First Name: Kelley
- Last Name: Kokemiller
- State or Province:
- Location: Boone, IA
-
- Posts: 241
- Joined: Sun Nov 17, 2013 11:52 am
- First Name: Daniel
- Last Name: Heath
- City or Town: Lexington
- State or Province: SC USA
- Location: Lexington, SC USA
- Contact:
Re: Tools
The first place to go is here:
https://picasaweb.google.com/tonyboytoo ... rToolList#
Familiarize yourself with Tony's site. Then you may want to look at some of the other sites listed in Builders Sites, like mine:
http://pantherbuilder.org/
The tools section is not complete on my site, but I plan to spend some time finishing that up this weekend.
https://picasaweb.google.com/tonyboytoo ... rToolList#
Familiarize yourself with Tony's site. Then you may want to look at some of the other sites listed in Builders Sites, like mine:
http://pantherbuilder.org/
The tools section is not complete on my site, but I plan to spend some time finishing that up this weekend.
PantherBuilder.org
-
- Posts: 76
- Joined: Fri Jun 07, 2013 7:46 pm
- First Name: Christopher
- Last Name: Braun
- City or Town: Rocklin
- State or Province: CA
- Location: Rocklin, CA
- Contact:
Re: Tools
Totally depends on money. A good start would be a file, a Cleco plier, some 3/32 and 1/8 clecos, and and some sandpaper and scotch brite pads. Wiss or Irwin aviation snips. Then an electric drill, the higher the rpm, the better, say 2000 plus from anywhere north of harbour freight. #30 and #40 drill bits. A metal ruler in metric and US. A long straightedge. 4 straight 2x4s and a level table. Some sort of manual rivet gun and manual dimpler at the least.
If you want a more comprehensive view,go to zenith or Sonex to see tool list. Probably better than Vans bc they don't include all the stuff for a driven rivet plane. A lot more tooling you won't use. Over this you can spend thousands,but each element just adds an element of convenience, more than necessity.
If you want a more comprehensive view,go to zenith or Sonex to see tool list. Probably better than Vans bc they don't include all the stuff for a driven rivet plane. A lot more tooling you won't use. Over this you can spend thousands,but each element just adds an element of convenience, more than necessity.
Christopher Braun
CFII - Owner Norcal Flight Center
EAA Lifetime #808722
Panther SN-052
CFII - Owner Norcal Flight Center
EAA Lifetime #808722
Panther SN-052
-
- Posts: 13
- Joined: Mon Feb 10, 2014 3:11 pm
- First Name: David
- Last Name: Schulz
- City or Town: Courtenay
- State or Province: British Columbia
Tools
Hi guys,
I have been searching all over the site for a tools list so I can get a head start buying the tools I will need for the tail kit. Is there a tools list somewhere?
I have been searching all over the site for a tools list so I can get a head start buying the tools I will need for the tail kit. Is there a tools list somewhere?