Dan Heath - Panther LSA Taildragger - Corvair 2700

See Panther Builders Websites/Builders Logs Here.
Forum rules
You must be a Panther Builder to post your website links here.


PlaneDan
Posts: 241
Joined: Sun Nov 17, 2013 11:52 am
First Name: Daniel
Last Name: Heath
City or Town: Lexington
State or Province: SC USA
Location: Lexington, SC USA
Contact:

Re: Dan Heath - Panther LSA Taildragger - UL Power 350is

Post by PlaneDan »

Just made an update to my web site. I have added a Construction Details Menu that lists all of the construction pages in alphabetic order. It is a simple dropdown menu that you will direct you to any topic you choose. From each of the target pages, you should be able to return to the Panther Builder Home page which has the same menu, as I have attempted to add this menu to all Word Press pages on the site.


http://pantherbuilder.org
PantherBuilder.org

GlenNJ
Posts: 152
Joined: Sun May 19, 2013 8:11 am
First Name: Glen
Last Name: Robinson
City or Town: Marmora
State or Province: NJ
Location: Marmora, New Jersey

Re: Dan Heath - Panther LSA Taildragger - Corvair 2700

Post by GlenNJ »

Thanks Dan,
I was wondering what you were up to. A whole lot of wiring. A lot of great photos and information.
Glen

PlaneDan
Posts: 241
Joined: Sun Nov 17, 2013 11:52 am
First Name: Daniel
Last Name: Heath
City or Town: Lexington
State or Province: SC USA
Location: Lexington, SC USA
Contact:

Re: Dan Heath - Panther LSA Taildragger - UL Power 350is

Post by PlaneDan »

I was cruising around the forum this morning and noticed that I had not posted anything in a very long time. I have been doing a lot of little detail things while waiting for the Cowling and have finished most of that, so decided to spend some of this down time doing some long overdue web site updates. Here is a very long one that you may find interesting.

http://pantherbuilder.org/PantherWeb/Av ... index.html

The details under this page show the installation of most things electrical, focusing on those associated with Avionics. You will see the installation of the Auto Pilot, the SkyView system, most of the components that make up that system, and a glance at the wiring of most of those items.
Here is a look at the panel, after all, are not all these gadgets, the real reason we build airplanes?
2017-06-11_PanelComponentShelf_03.jpg
To see the details, use the Avionics Details menu under the Electrical menu.
You do not have the required permissions to view the files attached to this post.
PantherBuilder.org

PlaneDan
Posts: 241
Joined: Sun Nov 17, 2013 11:52 am
First Name: Daniel
Last Name: Heath
City or Town: Lexington
State or Province: SC USA
Location: Lexington, SC USA
Contact:

Re: Dan Heath - Panther LSA Taildragger - Joining Fuselage

Post by PlaneDan »

Just completed joining the two halves of the fuselage. It is only to the Cleco stage, so there is a lot more work to be done. I was very concerned about being able to do this, but it actually turned out to be quite easy.

http://pantherbuilder.org/PantherWeb/Fu ... index.html
PantherBuilder.org

PlaneDan
Posts: 241
Joined: Sun Nov 17, 2013 11:52 am
First Name: Daniel
Last Name: Heath
City or Town: Lexington
State or Province: SC USA
Location: Lexington, SC USA
Contact:

Re: Dan Heath - Panther LSA Taildragger - Corvair 2700

Post by PlaneDan »

Completed sealing the tanks on or around May 5, 2015, but have been slack about doing the "paperwork". So, you can see it now in WordPress form at: http://pantherbuilder.org/fuel-tanks/

And you can see the construction details at: http://pantherbuilder.org/PantherWeb/Fu ... index.html
PantherBuilder.org

PlaneDan
Posts: 241
Joined: Sun Nov 17, 2013 11:52 am
First Name: Daniel
Last Name: Heath
City or Town: Lexington
State or Province: SC USA
Location: Lexington, SC USA
Contact:

Re: Dan Heath - Panther LSA Taildragger - Corvair 2700

Post by PlaneDan »

Thanks Rick.

Tony, yes of course. I have both parts ready to join, but have no room to do so until I get the wings to the hangar. That is why I am pressing so hard to get these tanks finished and installed. I see Bill up there in Greer doing just that now. I hope to get up there to see him and take a look at it before I begin that process.

Bill, you hear that?
PantherBuilder.org

User avatar
at7000ft
Posts: 175
Joined: Sun Apr 13, 2014 4:59 pm
First Name: RICK
Last Name: HOLLAND
City or Town: CASTLE ROCK
State or Province: Colorado
Location: Castle Rock, CO

Re: Dan Heath - Panther LSA Taildragger - Corvair 2700

Post by at7000ft »

Great info Dan, I used a welded aluminum tank with a cork and welding wire gauge on my first project so working with that black gooey stuff and a real sender unit will be all new to me to. You site is going to help a bunch.

Rick H
Rick Holland
N6819Z

PlaneDan
Posts: 241
Joined: Sun Nov 17, 2013 11:52 am
First Name: Daniel
Last Name: Heath
City or Town: Lexington
State or Province: SC USA
Location: Lexington, SC USA
Contact:

Re: Dan Heath - Panther LSA Taildragger - Corvair 2700

Post by PlaneDan »

Making progress on my fuel tanks. See this link for a lot of pics and details on some of the construction.

http://pantherbuilder.org/PantherWeb/Fu ... index.html
ClecoEd01_t.jpg
Pickup17_t.jpg
Sender05_t.jpg
Sender11_t.jpg
See details at: http://pantherbuilder.org/PantherWeb/Fu ... index.html
You do not have the required permissions to view the files attached to this post.
PantherBuilder.org

Post Reply