The Panther is about 19 feet over all. I would tell you that it should be at least that long and8 feet wide. these are absolute minimums. You have to have enough room to walk around the airframe, and to work on it. I have a 28 x 40 garage., and I wish it was larger!
Panther #46
Bill Mosher
ynkster@aol.com
Dimensions
Forum rules
A forum for Panther aircraft builders and Enthusiasts. Two simple rules: Play nice and use a real name
A forum for Panther aircraft builders and Enthusiasts. Two simple rules: Play nice and use a real name
-
- Posts: 38
- Joined: Sat Aug 02, 2014 4:56 pm
- First Name: william
- Last Name: mosher
- City or Town: greer
- State or Province: sc
- F16dcc431
- Posts: 22
- Joined: Fri Nov 17, 2017 9:20 pm
- First Name: Joshua
- Last Name: Wilson
- City or Town: Port saint lucie
- State or Province: Fl
Re: Dimensions
I need the length of the airframe when the the aft fuselage and fwd fuselage are joined to include rudder and elevator. I am verifying space need in my shop for the next step of the process.
Joshua Wilson #094
- JimParker256
- Posts: 39
- Joined: Sat Jul 12, 2014 7:01 pm
- First Name: Jim
- Last Name: Parker
- City or Town: Farmersville
- State or Province: TX
- Location: KTKI - McKinney National Airport, Texas
Re: Dimensions
Not meaning to be a PITA or anything, but "Firewall -AFT" is a pretty general specification. I think you need to be more specific, like "Top of firewall to back edge of rudder hinge" or something like that. Otherwise, you may get a dimension that isn't what you need
Jim Parker
Rans S-6ES (Rotax 912ULS)
Panther / Cougar - someday?
Rans S-6ES (Rotax 912ULS)
Panther / Cougar - someday?
- F16dcc431
- Posts: 22
- Joined: Fri Nov 17, 2017 9:20 pm
- First Name: Joshua
- Last Name: Wilson
- City or Town: Port saint lucie
- State or Province: Fl
Dimensions
Can some one take a measurement from the Firewall -AFT. I am preparing for the next section of my build.
Joshua Wilson #094